https://www.photo.gallery/documentation/filemod/
(forum: viewtopic.php?t=4121)
(Ex.: https://www.photo.gallery/demo/x2/#/cont ... otoblinds/)
You can change the following parameters for the photoblinds effect(values below are default):
Code
mininterval = 1000
maxinterval = 4000
minspeed = .2
maxspeed = 1
minwidth = 50
maxwidth = 100
maxamount = 6
blur1 = 10
blur2 = 20
brightness1 = -10
brightness2 = 18
Code
maxspeed=2&maxwidth=200
mininterval(1000) and maxinterval(4000)
Sets the interval(milliseconds) from on 'blind' is created until the next 'blind' is created. In the default values, a new 'blind' is created at random between 1 and 4 seconds.
minspeed(.2) and maxspeed(1)
Sets the speed of each 'blind' in pixels per framerate. With the default values, each 'blind' gets a random speed between .2 and 1 pixels per framerate.
minwidth(50) and maxwidth(100)
Sets the width of each 'blind'. With the default values, each 'blind' gets a random width between 50-100 pixels.
maxamount(6)
Sets the max amount of 'blinds' on the screen simultaneously. New blinds will not be created until existing blinds have disappeared.
blur1(10) and blur2(20)
Sets the relative amount of blur for each blinds layer(there are 2 layers of blinds).
brightness1(-10) and brightness2(18 )
Sets the relative brightness for each blinds layer(there are 2 layers of blinds)
Warning! Please proceed with care! Setting any of these values outside a realistic range may cause your gallery to run really slow, or even fail.