Search…

X3 Photo Gallery Support Forums

Search…
 
Olimess
Topic Author
Posts: 9
Joined: 21 Nov 2006, 00:00

Imagefolder Level with thumbnails on Start.

21 Nov 2006, 00:16

Somehow I doubt it but is it possible to have the gallery start at an imagefolder level either through a URL link or through the config file? In other words, can the imagevue gallery start within a specified imagefolder in thumbnail mode when it is launched?

Hopefully that makes sense. This is not the same as singlelevel but rather would be considered zerolevel.



Thanks for your time.
Olimess
 
User avatar
globetrotter
Imagevue Expert
Posts: 844
Joined: 18 Oct 2006, 13:16

21 Nov 2006, 01:46

Yes this is possible.

By URL (example): https://www.photo.gallery/imagevue/?fold ... 20Designs/

Or by config.ini (example):
folder = content/Computer%20Graphics/Nice%20Designs/

See also: https://www.photo.gallery/support/docs/117
Rene
http://www.globetrotternet.nl/
 
Olimess
Topic Author
Posts: 9
Joined: 21 Nov 2006, 00:00

21 Nov 2006, 09:14

Thanks for the reply globetrotter. I'll have to check that out!
Olimess
 
Olimess
Topic Author
Posts: 9
Joined: 21 Nov 2006, 00:00

26 Nov 2006, 00:14

Works GREAT!

But I do have one complaint/issue.

Let's see if you can follow. Using the .ini approach. Let's say I have the main config.ini file. The startheading would be defined as "Gallery Samples". The image folders under the content folder would be organized as follows.
Code
Group 1 ------- Sub Group 1
        ------- Sub Group 2

Group 2 ------- Sub Group 1
        ------- Sub Group 2
        ------- Sub Group 3
Through imagevue, the header would initially read "Gallery Samples". If I then navigated to the Sub Group 2 Folder, the heading would then display "Sub Group 2". On mouse over the heading would read something like "Group 1: Sub Group 2".

Using your approach to solve my initial problem works great but I notice that the heading is not as it should be. If I defined a .ini config file to directly open the Sub Group 2 folder the heading would read "Sub Group 2" as expected but on mouse over would read "- : Sub Group 2".

Any way to fix this?
Olimess
 
User avatar
globetrotter
Imagevue Expert
Posts: 844
Joined: 18 Oct 2006, 13:16

27 Nov 2006, 05:26

I have seen the problem, it's the same in my gallery.
I have tried a few thing, but no good result.

You can set: startheading = false
So you don't see the wrong header. :?
Rene
http://www.globetrotternet.nl/